I've got one left over

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Sirus

Sirus

Your all Banned except me
Posts
22,196
Location
The Country of Black
Just fitted me new starter motor on me V8. its a new model for the older stryle one.

I have connected the wires to the terminals bu thave one left over with nowhere to go. Its yella wiv a push tag on it. The engine starts fine but I have noticed the battery light is now perm on while the engine is running.

Where should this spare wire go????
 
One terminal should have the big fat one from the battery on it and two brown 'uns, one to the L+ terminal on the alternator (I suspect that this is the one not connected) & one to the fuse box taking power off to elsewhere. The other should have a white with a red tracer going to the ignition switch.

How many wires/terminals/colours have you got?
 
Marcus said:
One terminal should have the big fat one from the battery on it and two brown 'uns, one to the L+ terminal on the alternator (I suspect that this is the one not connected) & one to the fuse box taking power off to elsewhere. The other should have a white with a red tracer going to the ignition switch.

How many wires/terminals/colours have you got?
Click to expand...

Two big fat uns to screw to the starter and two push thingys. one push thingy is bigger then the other (Red one) the yella one is smaller and it dunt fit anywhere.
 
Sirus said:
Two big fat uns to screw to the starter and two push thingys. one push thingy is bigger then the other (Red one) the yella one is smaller and it dunt fit anywhere.
Click to expand...

Did yer old starter have a double terminal to allow both female connectors to fix to it? If so, just crimp/solder on a new connector with both wires in it. Both of those small un's should come off of the same terminal as the one from the battery..............though the actual join between the fat one & the small one may be inside the cover of the solenoid.

Got a flash on yer camera?
 
Marcus said:
Did yer old starter have a double terminal to allow both female connectors to fix to it? If so, just crimp/solder on a new connector with both wires in it. Both of those small un's should come off of the same terminal as the one from the battery..............though the actual join between the fat one & the small one may be inside the cover of the solenoid.

Got a flash on yer camera?
Click to expand...

Yes th old un had two female sliddy things that these were on. so they should all be on the same one then?
.
 
wot yu need to know is....

1) wots the current consumption of the heater plugs? (fuse rating?)
2) wot current can the timer handle - its only meant fur interior lights (5w = 1/2Amp)!

else yu might need to use the timer to switch anuffer relay.

wots the squirkit of the heaters?
aren't yo heaters switched anyway?
wudnt a switch and big light be easier?
 

Attachments

  • glr1.JPG
    glr1.JPG
    37 KB · Views: 130
You must log in or register to reply here.

Similar threads

S
starter motor questions
Replies
17
Views
2K
McBoon
McBoon
P
starting issue
Replies
4
Views
304
Alteredtech
Alteredtech
A
Electron ignition
Replies
5
Views
773
Tony Monsantoe
Tony Monsantoe
S
Trouble with ignition switch wiring
Replies
11
Views
1K
tottot
tottot
J
Help please! Electrical issue with 1995 Defender 110 County, 300 tdi
2
Replies
35
Views
2K
Oliverryan96
O
Back
Top