Is this 5way connector available separately?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
julianf

julianf

Well-Known Member
Posts
2,305
Location
Devon, UK
Not this one -

766315160_tp.jpg


..but the one that plugs into it.

I know bullets will force over, but id rather use the proper part. Its in the lights / indicator assembly.


Irritatingly, i threw out one about 3 weeks ago, on an old bit of loom : /
 
I can just hammer standard bullets on, so, if im going to change things / bodge it, that's what ill do. It would have been nice just to get the correct part, esp since i scrapped a loom only last month (i cut all the connectors off it, and saved the colour coded wire for odd jobs, when its too much bother to buy a whole reel in the correct colour)

I remember cutting off that connector and scrapping it : (

Its the connector on the indicator stalk.
 
julianf said:
I can just hammer standard bullets on, so, if im going to change things / bodge it, that's what ill do. It would have been nice just to get the correct part, esp since i scrapped a loom only last month (i cut all the connectors off it, and saved the colour coded wire for odd jobs, when its too much bother to buy a whole reel in the correct colour)

I remember cutting off that connector and scrapping it : (

Its the connector on the indicator stalk.
Click to expand...
Had a look in mi might come in useful pile earlier but only got the old indicator side same as yours. Its a bit of a bu@@er int it...............:(
 
Didnt the hazard warning loom have some of those on it. I have one somewhere. I'll have another look in the morning.
 
Had a quick look but cant see anything similar. I think they are a joint male/female connector and this is probably a 6 way with one way unused. May have to bite the bullet (no pun intended)and use a Mate n Lock or a Tyco connector.
 
julianf said:
Not this one -

766315160_tp.jpg


..but the one that plugs into it.

I know bullets will force over, but id rather use the proper part. Its in the lights / indicator assembly.


Irritatingly, i threw out one about 3 weeks ago, on an old bit of loom : /
Click to expand...
Bleedin ell. That took some finding...............
I have just found an old hazard warning loom. It was actually in the bottom of an oily sack awaiting a trip to the tip :rolleyes:

Its yours if you want it...........it has two of the 5 pin plugs along with the two sockets. PM me your address and I'll get it off to you, ye pest :p
 
You must log in or register to reply here.

Similar threads

S
Reverse switch
Replies
2
Views
499
Wildefalcon
W
Captain Cavemen
Alternator wiring
Replies
13
Views
2K
Captain Cavemen
Captain Cavemen
Bife
Freelander 1 Rear in-bumper indicator bulb holder?
Replies
1
Views
361
Bife
Bife
StuRox
Disco 1 Problem with Fuel Gauge - 300 Tdi
Replies
4
Views
610
StuRox
StuRox
malcolm_durant
Freelander 1: Indicators and Hazard Lights << RESOLVED >>
Replies
4
Views
2K
andyfreelandy
andyfreelandy
Back
Top