Freelander 1 Injector Wiring Loom Spares? I need the rubber seals.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Hard Drive

Hard Drive

Active Member
Posts
145
Location
York
Hi. Might anyone know if it's possible to buy replacement rubber seals (orange coloured) for my Injector Loom? See the photo for details.
plug.jpg
I'm now missing one and there's a chance the rest will be as perished.
Thanks.
 
An update to my need for the Injector Harness Plug seals.
To begin with, I made a huge error. I cleaned the contacts with Carb&Choke Cleaner. That basically ruined the rubber seals - I think.
Secondly, having cleaned with Contact-Cleaner, I found a rubber seal that does the job.
See this picture...
DSCF1183.JPG
It's a good air/water-tight seal, which is just what I needed. Inexpensive and easily fitted with an engineers-point screwdriver.
It is :- id 13 x 1.5mm . od 16 x 1.5mm
I have a box of seals and it was a case of trial-and-error.
It's fixed. The plugs themselves are okay, it was just the soft orange seals that were affected.
My thanks goes to 'andyfreelandy' who gave me good advice.
This seal information might be of use to you or others, so take it on-board.
 
You must log in or register to reply here.

Similar threads

Scumball500
DEFENDER rubber tunnel 1987 2.5 petrol
Replies
1
Views
566
dag019
dag019
johnnymarrsbarres
Tdci sunroof seals
Replies
1
Views
153
Def90man
Def90man
Ric82
Series 3 Landrover Series 3 Diesel 2.25 Alternator Wiring Loom.
Replies
9
Views
2K
Ric82
Ric82
1
Defender 90 TD5 rear wash wiring loom from dash switch to pump?
Replies
12
Views
1K
dag019
dag019
2
Need Help with Misfire Issue on Rescued L322 (2003)
Replies
9
Views
829
Mark Piercy
Mark Piercy
Back
Top