indicators

whitstella · May 27, 2014

Putting my dash back together and put new bulbs in the dash, I tried the indicators and they work fine apart from the lights on the dash they both flash.

Any ideas????

Cheers steve

Oldseadog · May 28, 2014

Presumably they are on a stalk and you have two telltales on your dash?

It seems as though you might have inadvertently connected both wires together from the relay.

Check which terminals you have used and amend if required.

Blackburn · May 28, 2014

Check the earths for the lamps behind the dash believe they screw onto the back of the gauges.
If a bad earth they will find another route ie through second bulb or other part of system.

whitstella · May 28, 2014

Hi

Yeah indicators on the stalk and lights on the dash. I have not touch the wiring on the relay but it had no bulbs in the dash so that could be a problem and I will check the earth.

Cheers

oxides · May 28, 2014

Do you have a hazard flasher switch? It will complicate matters a little. My money's on a bad earth on the back of the clocks.

whitstella · May 30, 2014

hi soz for late reply. no nothing like that, I will try earthing tomorrow if im let out of sight for an hour.

indicators

whitstella

Active Member

Oldseadog

Well-Known Member

Blackburn

Well-Known Member

whitstella

Active Member

oxides

Well-Known Member

whitstella

Active Member

Similar threads