Indicators stopped working

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

Acdadefender1

Member
Posts
29
Hi all. I’m hoping someone can help..

I have installed new LED lights and everything was fine until I installed the side marker indicators. Now all indicators and hazards have stopped working including the dash light and clicker. All fuses are fine, hazard switch looks ok no obvious burn out and I’ve changed the flasher relay. HELP! Thanks
 
Hi. I’ve changed the fuse for the hazards.. they are working now.. indicators still not.. no lights on dash either. Thanks
 
Right I’ve changed the relay and the hazard switch.. both indicators and hazard are working but when indicating in either direction the other indicator ‘ghosts’ the other side by dimly blinking.. do I need an earth leakage cable? Thanks
 
Acdadefender1 said:
Right I’ve changed the relay and the hazard switch.. both indicators and hazard are working but when indicating in either direction the other indicator ‘ghosts’ the other side by dimly blinking.. do I need an earth leakage cable? Thanks
Click to expand...
Have you turned the knob on the relay till the trailer light on dash flashes once?
does the turn signal work on the dash?
 
You must log in or register to reply here.

Similar threads

Cornishdefender
Fuse blowing - fuel gauge, temp gauge, indicators (not hazards) full beam (not flashing)
Replies
19
Views
1K
Grebby
G
H
Indicators not behaving - any ideas?
Replies
6
Views
1K
henrythelandy01
H
DefendingLancashire
Advice on decent flasher relay replacements? (1996 Defender 90)
Replies
0
Views
259
DefendingLancashire
DefendingLancashire
F
Locking and unlocking - indication by hazard flashers (3 short or 1 long)
Replies
2
Views
223
FOXTON
F
adyw
Intermittent indicators.
Replies
10
Views
397
adyw
adyw
Back
Top