Indicators and hazards not working! Defender TD5

Swaany54

New Member

Posts

2

Location

South

• Jan 15, 2020

• #1

Hi, looking for some advise on why my indicators and hazards aren’t working. Changed the indicator stalk and hazard switch still nothing. All wires have got power and all lights come on when checked with power probe.


Thanks

 

wireman

Well-Known Member

Posts

1,169

Location

Warrington

• Jan 16, 2020

• #2

Have you tried a new relay or at least check the connections (cleanliness/tightness) on it.

 

Swaany54

New Member

Posts

2

Location

South

• Jan 16, 2020

• #3

i havent. I will replace the Relay in the week. Hopefully that’s will be the problem.
Thanks

 

M

Mark Leedham

Member

Posts

10

Location

Stoke On Trent

• Jan 16, 2020

• #4

Also worth replacing the hazzard light switch.

 

Brown

Well-Known Member

Full Member

Posts

7,877

Location

East Midlands

• Jan 16, 2020

• #5

Also, it's worth checking the fuse. I had a fuse develop a high resistance (it went up to 70 ohms suddenly) so I was puzzled why there seemed to be electricity but the lights weren't working. The mere presence of 12v doesn't guarantee operation, it needs to be able to deliver some current too!