In-line thermostat mod??

Bryn Simpson · Nov 23, 2021

Hi I’ve got a 2003 td4 automatic freelander. The temperature gauge is staying at around a quarter which leads me to believe that the thermostat is stuck open and it’s supposed to be a pig of a job to replace (I’m no mechanic) I’ve read some of the forums and they all suggest putting a in line thermostat in the top radiator pipe which looks easy on the videos but I’m really struggling to push the thermostat in. Its the same size thermostat as everyone recommends but it seems like my radiator pipe is smaller maybe cause it’s a automatic. Can anyone help as the next step is the scrap yard as I can’t keep throwing money at it.

kernowsvenski · Nov 23, 2021

The auto pipe is smaller, and it's a pain to get the stat in. You just need to persevere. It took me about 45 mins and a sliced hand to get mine in. Use a bit of plastic waste water pipe on a flat surface on the body of the stat and slide the hose down

Spitfire2 · Nov 23, 2021

I did mine on a auto keep at it try a small amount of grease it’s worth it in the end good luck

Bryn Simpson · Nov 23, 2021

Nice one I thought I was going mad. I’ll give it another go at the weekend

Nodge68 · Nov 24, 2021

Bryn Simpson said:
Nice one I thought I was going mad. I’ll give it another go at the weekend

I used plumbers silicone grease to get mine it.

Bryn Simpson · Nov 24, 2021

Nodge68 said:
I used plumbers silicone grease to get mine it.

I’ll try that today thanks.

Bryn Simpson · Nov 24, 2021

I’m happy to tell you that the mod worked it took some getting in but I used some waste pipe and plumbers grease and it squeezed in just. Thanks for the advice

DanClarke · Nov 24, 2021

Another triumph over the LR engineering team then.

In-line thermostat mod??

Bryn Simpson

New Member

kernowsvenski

Well-Known Member

Spitfire2

Member

Bryn Simpson

New Member

Nodge68

Well-Known Member

Bryn Simpson

New Member

Bryn Simpson

New Member

DanClarke

Well-Known Member

Similar threads