How much dinitrol for inside the chassis & bulkhead?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I used around three and a half litres in my 110 chassis,stopped then as it was saturated and dripping out all over the shop.
 
I got the Large car kit from Rejel, then added a couple more! But I wanted to go OTT.

Also got the Dinitrol gun, which while fooking expensive is really really good.:D
 
If that's the version I used inside it is fairly thin and runny so it used less than I expected. Just keep spraying it in until it starts running out in other places. Keep moving the lance back and forth through the chassis holes to make sure it's spread around all over the place inside. Rather than put gallons in just for it to run out on the ground I ended up keeping a bit back so as to give it another spray in a year or two's time. Don't forget the little holes in the bottoms of the doors too.
 
yup, popped it in the over for 5mins at 100c.

Perfect.

But remove the plastic caps and seals first and stand it upright - bit of a bugger if you don't.
 
Cheers chaps.

I have modified my Schutz gun so it has a 4 foo long rubber pick up pipe I can just dip in the container, my plan was to heat the can up with boiling water and leave it standing in that to keep it runny
 
Thanks for all this information, Gents. As I've just got my 90, I'm hoping to rust treat it and nip (slow down) any further rot in the bud. At the moment I'm thinking the large Dinitrol kit from Rejel. I'm also thinking of POR15 Stop Rust Kit in Black (Small size) for touching up any part that's already got rust on it - that I can access of course. Inside the rails, I'll have to use the Dinitrol ML.

Does this sound correct to you?

benpalmer, you mentioned a Dinitrol gun..? Which one is that?

Seems a bit wasteful for me to buy a sprayer for a once-in-a-few-years job. We should have a sprayer-sharing-club. :D
 
benpalmer said:
yup, popped it in the over for 5mins at 100c.

Perfect.

But remove the plastic caps and seals first and stand it upright - bit of a bugger if you don't.
Click to expand...

I can only imagine. Destroyed a washing machine with waxoyl soaked overalls 3 years back - would have been doubly popular if I'd destroyed the oven as well!
 
You must log in or register to reply here.

Similar threads

dag019
Which dinitrol
Replies
9
Views
2K
dag019
dag019
dag019
Dinitrol application - what am I doing wrong?
2 3
Replies
41
Views
5K
dag019
dag019
malcolm_durant
Freelander 1 How generic are the cabin wiring looms?
Replies
10
Views
1K
damian46
damian46
S
Defenders Vs Insurers tomfoolery
Replies
1
Views
3K
lightning
lightning
sea27n
DEFENDER 110 XS 2007 FOR SALE
Replies
2
Views
1K
sea27n
sea27n
Back
Top