Holy crap......

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I did the same just before xmas!!! Rust be fooked...... I've just got a replacement inner wing for mine then she's ready for some mods. But upon browsing the disco section some peeps motors are made of rust, but then rebuilt.

Thank heavens I still got my Freelander!!!!
 
Its suprisingly rust free, there one little bubble under that paint on the tailgate. Inner wings are good.

Its a 3.5 v8 manual, 2 door, and even still has the landrover handbag!!
 
nice one, i got the 3.9 v8, think ive been lucky with the rust too considering some models i have seen. Still its a long term project anyway, so on the drive for a while being worked on. Hence the reason I still have the freelander DISCOPOL, so the wife can still get to work, drop the kids off and we can still go laning with the club!!!
 
:dance: 3.9 v8.....i take it it will be on drive for a while thanks to fuel prices,thank god i have my hippo. :dance:
 
At least they int bought a durdy tratter. I does feel sorry for them having to deal with tin worm. Must be difficult. Warms yer heart to think so many sent in their buscuit tins to help patch up the older vehicles. Am glad to say my Freelanders nearly 11 years old and he still has his original boot floor.

*cough*

PL78QWK.jpg

DSCN1363 PL78QWK
 
Last edited:
I think that they liked saving paint at halewood. I've never understood why the didn't paint all of the hippo bodies, properly.
 
Vertuas said:
I think that they liked saving paint at halewood. I've never understood why the didn't paint all of the hippo bodies, properly.
Click to expand...
Thats a solihul hippo. Manufacturers only paint primary areas of the car with the colour coat. This is everything you can see with the doors closed, from the outside. Hence around the door isn't always done. Around the doors are secondary areas so they don't alwasy get done, but most do. Inner boot space is a secondary area too. Not always done. Found this out when complaining about me last car to ford.
 
Hi,
just to let you know all land rovers vehicles post 1994/5 went through an ecoat dip before they were painted. secondary areas was painted but did not have clear coat applied (cost saving). other areas like the roof on the inside of the car had no paint just ecoat, if you take a look its like a brown/green colour. i worked there for 16 years from 1990 to 2006 this is how i know this.
 
If you painted mine, well done, she polishes up loverly!!! However it must have been assemble on a Friday afternoon, just before shut down. I havent worked there but feel as though I too have 16 yrs experience since getting my hands on her!!!!
 
leemx1 said:
Hi,
just to let you know all land rovers vehicles post 1994/5 went through an ecoat dip before they were painted. secondary areas was painted but did not have clear coat applied (cost saving). other areas like the roof on the inside of the car had no paint just ecoat, if you take a look its like a brown/green colour. i worked there for 16 years from 1990 to 2006 this is how i know this.
Click to expand...
Do they also do cathodic protection where they somehow electrocute the metal as part of the anti rust proofing? Just wondered. They did this to my ford. Metal wasn’t clean due to what they called “sealer skip” so there was a few rust patched near the seams.

Building Freelanders for a living is near the top of me favorite jobs lists. I do a bit in me spare time.
 
Hippo said:
Building Freelanders for a living is near the top of me favorite jobs lists. I do a bit in me spare time.
Click to expand...

hmmmmm......imagine running 45 spots around the bodyside inner using a very large very heavy spot welder in 1 minute 45 seconds at 3am on a friday morning with fours hours left til hometime, 144 left to do and you've already done 216........far from fun mate....
 
Hippo said:
At least they int bought a durdy tratter. I does feel sorry for them having to deal with tin worm. Must be difficult. Warms yer heart to think so many sent in their buscuit tins to help patch up the older vehicles. Am glad to say my Freelanders nearly 11 years old and he still has his original boot floor.

*cough*

DSCN1363.jpg
Click to expand...
we had a discovery 300tdi 16yrs old just done boot floor and sold it on its been a great work horse we also have a td5 would of loved to got a low mileage well looked after 300 but couldnt find 1the td5 has cost more than the 300 did in the ten yrs and we have only had it 2 yrs iv just brought a 3 door freelander 52 plate well looked after diesel but cant even drive it at present as had shoulder surgery
 
Haaa haaaa

the disco threw the water pump pulley, causing the timing belt to slip and killed of the heads, whilst the guy was bringing it for delivery.

Looks like they are as reliable as a Hippo.

Got my refund.......
 
You must log in or register to reply here.

Similar threads

D
Diff switch
Replies
2
Views
289
donsdilema
D
K2tnt
Disco 1 Discovery 1/2 rear door aperture corners?
Replies
2
Views
558
K2tnt
K2tnt
Entwhistel
Symptoms of high pressure fuel pump on It's way out.
Replies
6
Views
3K
kernowsvenski
kernowsvenski
xrv750
Freelander 1 Freelander prop shaft
Replies
7
Views
1K
xrv750
xrv750
doriz
For Sale Rear ARB bushes Terra dactyl TF1025
Replies
0
Views
565
doriz
doriz
Back
Top