hi to all please help on discovery 2 td5 2001 lots of problem

Albert K · Nov 11, 2017

hi to all i bought a disco td5 auto y reg and now the m/s flashing and the gear indicator in dash board, i`m selecting the gear but is not mowing at all for like couple of seconds i think is the xyz switch i bought one new but anybody know if i need the Alignment tool or is possible without the tool to put it on ? i got a new turbo and a mass air flow and k&n filtter also to install, and the car himself is not level at the back it stays a bit on the left side lower then right side yes i know is sound a lot on it but i don`t want to give up so easy

thank you all

ROY SIMPSON · Nov 11, 2017

Hi Albert,
Best post your enquires in the discovery forum.
Look for a copy of rave the land rover workshop manual for discoveries and read up on automatic gears box and transmission and you will find there are many reasons for the m& s lights to flash, like wise you will find detailed step by step instructions for removing and re fitting turbo etc and self levelling suspension information.
If rave is not available on this site, it is on D2Boysclub site.
As a first step to finding a solution to your problems it is worth having all your fault codes read( rather than jumping in and buying expensive parts ie xyz switch) and then posting a detailed description of the fault and its symptoms.
A couple of points to consider before changing xyz switch
The delay in moving away when you select drive when the m&s lights are flashing may be due to you being in 4th gear which is the default setting for the gear box
Known as limp home mode when the m&s lights flash.
If the m&s lights flash when starting the car it may be that the battery is faulty as the automatic transmission system is very voltage sensitive and a drop in voltage when cranking the engine with a poor batter is enough to register a fault.

Albert K · Nov 11, 2017

ROY SIMPSON said:
Hi Albert,
Best post your enquires in the discovery forum.
Look for a copy of rave the land rover workshop manual for discoveries and read up on automatic gears box and transmission and you will find there are many reasons for the m& s lights to flash, like wise you will find detailed step by step instructions for removing and re fitting turbo etc and self levelling suspension information.
If rave is not available on this site, it is on D2Boysclub site.
As a first step to finding a solution to your problems it is worth having all your fault codes read( rather than jumping in and buying expensive parts ie xyz switch) and then posting a detailed description of the fault and its symptoms.
A couple of points to consider before changing xyz switch
The delay in moving away when you select drive when the m&s lights are flashing may be due to you being in 4th gear which is the default setting for the gear box
Known as limp home mode when the m&s lights flash.
If the m&s lights flash when starting the car it may be that the battery is faulty as the automatic transmission system is very voltage sensitive and a drop in voltage when cranking the engine with a poor batter is enough to register a fault.

Thank you mate for the advise the only problem is the disco is not in england and the are not to many mechanics who knows anything about it so i try to find out my self about it i guess in the hard way.. but thank you any way for the advise

jamesmartin · Nov 11, 2017

Albert K said:
Thank you mate for the advise the only problem is the disco is not in england and the are not to many mechanics who knows anything about it so i try to find out my self about it i guess in the hard way.. but thank you any way for the advise

you dont need any tools etc to fit another xyz switch it has slotted holes you adjust it so lights and display match actual lever position

hi to all please help on discovery 2 td5 2001 lots of problem

Albert K

New Member

ROY SIMPSON

Active Member

Albert K

New Member

jamesmartin

Well-Known Member

Similar threads