Hi-cap Tub Repair

Hello,
Does anyone have experience with replacing the rear corner pieces on a hi-cap tub?
I've just ordered the upper and lower corner pieces for one side and center pillar for both sides. There are at least 2 different types of rivets which hold it all together but sadly it seems one type is no longer available.
I'm waiting for the pieces to arrive before I start trying to take it apart but in the meantime figured I'd ask the experts for any tips/advice.
Thanks!

Good luck
I used normal rivets when I done some front corner work. Make sure you take photos etc as things get forgotten when removing stuff.
Have you damaged the corners that bad!?

Hicap phill said:

Good luck
I used normal rivets when I done some front corner work. Make sure you take photos etc as things get forgotten when removing stuff.
Have you damaged the corners that bad!?

Click to expand...

One pillar was a bit bent when we bought the car and sadly I've managed to mangle the other side, to the point it really needs to be repaired. Some rivets have already been replaced at some point. I'll take lots of photos and try to keep track. Just unsure how it all goes together at the moment...