Help RR 98SE

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

rchildress

New Member
Posts
8
I am a new P38 owner (at least its new to me), the previous owner gave me 2 keys/remotes 1 recently just stopped working I change the batery's but the ligh wont come on when depressed and the other isnt programmed to the vehicle. Does anyone know how to program a remote?

Also the check engine light is on I have had the codes read and did some research on them they are

P0116
Engine Coolant Temperature Sensor Falling Temp Fault

P0125
Engine Coolant Temp Sensor Warm Up Fault

and

P0118
Engine Coolant Temperature Sensor High Out of Range Fault
assumably there is an engine coolant issue, I dont know how to reset the light on this vehicle to confirm that there is an issue can I get a little direction from you fine people?!?!?

Thanks....
 
hi, first off, to reprogram the key, put it in the door lock and lock and unlock the car, then try, this should re-sync the key, if the light in the key isn't working then you either have a duff remote or the batteries are flat

you have 3 stored fault all relating to the coolant temp sensor, so you need to check the wiring from the sensor to the ecu, if thats ok, renew the sensor
 
Back
Top