help out please.

Keon · May 6, 2010

does sombody knows:how much RMP is needed on PTO(power take off) in 1st, 2nd and 3rd gear after transmission

p.s. sorry for my english if it's wrong.
p.s.s. sorry if there isn't enough info, my dad just didn't want to do it him self so he gave me this what you see above.

Vagrent · May 6, 2010

What are you running on you PTO?

Keon · May 7, 2010

running electricity generator 30kW required max 540 rpm, that's why i need to know PTO rpm

Sean · May 7, 2010

that's a fooking big genny

Vagrent · May 7, 2010

Keon said:
running electricity generator 30kW required max 540 rpm, that's why i need to know PTO rpm

What sean said

My mate used to have a Dodge nifty with a pto jenny, and all we used to do was engage pto stick it in 5th and leave it on tickover.
Have you fitted it yourself or is it supposed to be there?
The jenny alternator's voltage will change voltage the faster the windings spin.
Engage pto, stick a volt meter on it,get the jenny spinning on tick over and see what the voltage says, in each gear.
So long as fingers are not in the plug and no appliances are plugged in, damage should not occur.
That way you can find out what's what.
If your tick over is high voltage will be high what ever.
Er, what voltage is the windings?

**Disclaimer, I would attempt this if it was my situation, but I would seek better advise from competent persons first, before fekking with Eletricity**

Sean · May 7, 2010

you'll be needing about 50HP to keep a 30KW gennset turning at rated output - anything that big is more usually connected to a tractor

Vagrent · May 7, 2010

Sean said:
you'll be needing about 50HP to keep a 30KW gennset turning at rated output - anything that big is more usually connected to a tractor

Is that at 240v or 110v

Sounds a bit big to me to.
Sure you don't mean 300w?

Keon · May 11, 2010

Sean said:
you'll be needing about 50HP to keep a 30KW gennset turning at rated output - anything that big is more usually connected to a tractor

sry was gone a while.
Sean you are absoulutely right

it is a tractor genny (30kW)
but i haven't got the right answer about RPM on pto in 1st 2nd 3rd gear. that is the only thing i don't know are these RPM. and i own a land rover defender and it should have 120HP so now as i said i don't know the RPM

help out please.

Keon

New Member

Vagrent

Yaaaar

Keon

New Member

Sean

Banned

Vagrent

Yaaaar

Sean

Banned

Vagrent

Yaaaar

Keon

New Member

Similar threads