Help needed

I

Ianr0183

New Member

Posts

4

• Yesterday at 20:17

• #1

Hi everyone
I'm Ian live in Sheffield have a 2005 discovery 3 2.7
I had a leak from the transfer box pressure selanode so I swapped it out not knowing the correct procedure... Now I have the orange hi / low range flashing and the green low range flashing on the dash..
Could I please get your guys help as b4 I tried to swap this over I had no problems at all etc

Thanks.... Ian

 

Stanleysteamer

Well-Known Member

Full Member

Posts

48,484

Location

East Dorset

• Yesterday at 20:53

• #2

@gstuart Hi Gary.
Any chance of you helping this guy out?

 

sierrafery

Well-Known Member

Posts

18,378

Location

Arad/Romania

• 54 minutes ago

• #3

Ianr0183 said:

I swapped it out not knowing the correct procedure

Click to expand...

Hi, that's the problem IMO, it must be connected and energised to be swapped also after that it needs calibration so you need a proper diagnostic tool which has this function, you can just simply mechanically swap it

 

I

Ianr0183

New Member

Posts

4

• 53 minutes ago

• #4

Any help would be great car worked perfectly beforehand

 

I

Ianr0183

New Member

Posts

4

• 51 minutes ago

• #5

sierrafery said:

Hi, that's the problem IMO, it must be connected and energised to be swapped also after that it needs calibration so you need a proper diagnostic tool which has this function, you can just simply mechanically swap it
View attachment 348009
View attachment 348010
View attachment 348011

Click to expand...

How can I get it all back working after not doing it correctly to start with? Thanks

 

sierrafery

Well-Known Member

Posts

18,378

Location

Arad/Romania

• 48 minutes ago

• #6

Ianr0183 said:

How can I get it all back working after not doing it correctly to start with? Thanks

Click to expand...

I have no ideea, my guess is that you'll have to remove it and refit it using the correct procedure