- Posts
- 83,252
- Location
- Embasinga stocæ
Has anyone who has done this, got the original connectors that yu have cut off - Need a set for a project I am working on, to test out a plugnplay upgrade loom.
Headlight upgrade - bits required
- Thread starter The Mad Hat Man
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
freelance
Well-Known Member
- Posts
- 8,636
- Location
- essex and beyond
are the connectors you need two or three wire type?
- Posts
- 83,252
- Location
- Embasinga stocæ
I believe one is 3 and one is 6.
C0070/0071 and C0011/0009
C0070/0071 and C0011/0009
freelance
Well-Known Member
- Posts
- 8,636
- Location
- essex and beyond
i have no bits like you describe, good luck.
- Posts
- 83,252
- Location
- Embasinga stocæ
so yu are saying yo freelander dont have thos conns 
- wot were yo connectors on yo old lights then?
My understanding is that the facelift uses 9 pin connectors and the older type used 6 pin for the lights and 3 pin for the adjustment?
Am I wrong?
- wot were yo connectors on yo old lights then?My understanding is that the facelift uses 9 pin connectors and the older type used 6 pin for the lights and 3 pin for the adjustment?
Am I wrong?
freelance
Well-Known Member
- Posts
- 8,636
- Location
- essex and beyond
i have no take offs of your description, but i do have wiring connectors from mondeos and renaults to hand but they are of no use to you in this instance.
Similar threads
