B
BrettDD
Guest
I have the most gutless truck in the world and am now going about
fixing it.
Several questions are:
I have a set of MAC shorty headers for a mustang. I have heard
conflicting stories on if they will fit or not and wonder if anyone
here has tried/done it.
Converting the speed density computer system to MAF. I have seen many
posts on it but would like to talk to someone who has done it on this
vehicle in case I have questions.
Have a set of E7TE heads ported, polished and fitted with 1.94/1.64
valves and a .050 Duration Int/Exh 220/220 SAE Duration Int/Exh
273/273 Gross Valve Lift Int/Exh 498/498 - Lobe C/L 110 cam which
should wake the whole thing up. Any concerns with this cam or setup if
using a MAF computer?
Bottom end is fresh or I would go the 351 route.
Let me know your thoughts and concerns.
Thanks
Brett
fixing it.
Several questions are:
I have a set of MAC shorty headers for a mustang. I have heard
conflicting stories on if they will fit or not and wonder if anyone
here has tried/done it.
Converting the speed density computer system to MAF. I have seen many
posts on it but would like to talk to someone who has done it on this
vehicle in case I have questions.
Have a set of E7TE heads ported, polished and fitted with 1.94/1.64
valves and a .050 Duration Int/Exh 220/220 SAE Duration Int/Exh
273/273 Gross Valve Lift Int/Exh 498/498 - Lobe C/L 110 cam which
should wake the whole thing up. Any concerns with this cam or setup if
using a MAF computer?
Bottom end is fresh or I would go the 351 route.
Let me know your thoughts and concerns.
Thanks
Brett