gearbox troubles

rowey2006 · Mar 29, 2006

hi
my gear box lights are flashing and the info said select n did this nothing happens drove car slowly gears are changing all the way up to top but still flashes and says select n
should i be worred or wait and see what happens
did get a smell like burnt chemicals but then went away

regards
marc

modelman · Mar 30, 2006

I had a similar experience a few weeks ago, turned out that the gearbox ecu under the l/h seat had blown a MOSFET, fitted a new ECU next day, all ok now.

rowey2006 · Mar 30, 2006

hi
when you had the problem is the car ok to drive?

also just noticed when indicating the normal repeating clicking in car to say indicators are on now there is no noise but indicators work,

are the two problems linked with the ecu

how much did you pay for ecu?

thanks
marc

modelman · Mar 30, 2006

Your problem may be different to mine, but when mine failed, I was stuck in 'low' range, could'nt go far like that! So I hooked up 12v to the ratio-motor behind the transfer box & 'powered' it back into 'high' range, left it like that until I fitted a replacement ECU.
The indicator 'click' is nothing to do with the gearbox ECU, its a small loudspeaker that makes the sound, probably disconnected itself somehow, not importent.

gearbox troubles

rowey2006

New Member

modelman

Active Member

rowey2006

New Member

modelman

Active Member

Similar threads