Gear Selection Guesswork

IanFiTheDwarf · Aug 29, 2011

Hi all, I have just bought a 1994 disco 300tdi manual and am having trouble selecting gears. The gearbox seems good in every other way, changes down to 2nd without crunching but the stick dose not centre and I have no clue which gear Im selecting including going into reverse in stead of first which isnt fun!

I have done a search but I dont really know what to search for so couldnt find any posts with this same problem

Can anyone could point me in the right direction please.

Cheers
Ian

sierrafery · Aug 29, 2011

presuming it's an R380, it has a selector mechanism, "bias", which transmits the movement from the lever to gears... it has a plastic bit at the bottom which used to crack( named yoke, pivot bush, etc according to the type of gearbox) ... u can check this mechanism by removing the centre console and open it.... the problem might be in there

MrPDude · Aug 29, 2011

Sounds like the bias spring has gone that centers the gear stick between 3rd and 4th.

Mine has also gone, its is now biased between 1 and 2 lol. You get used to it. Or fix it, its only one or 2 screws i think

Fireburst · Aug 29, 2011

Hi

I did mine some time back for the same reason, it was the plate that holds the bias spring which was broken, this is a common problem and cheap to fix.
It is an easy job to fix but a pain to get to, you have to remove the center consul and both gear gaitors, then drill out about 12 large rivets to get to the selector mechanism the rivets closest to the engine are a bit of a pain to get to.

Jim

IanFiTheDwarf · Aug 30, 2011

Cheers guys, If doesn't sound like too hard a job and thankfully not expensive either.

Gear Selection Guesswork

IanFiTheDwarf

New Member

sierrafery

Well-Known Member

MrPDude

Active Member

Fireburst

Member

IanFiTheDwarf

New Member

Similar threads