Fuel tank outie

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Officerdibble

Member
Posts
80
Location
Northwich
Ok so I’m replacing fuel tank on a 90 300tdi on a 95 plate disconnected the fuel lines , sender wiring, unbolted rear mounting fixing & removed front tank support bracket , then slightly twisting tank anti-clockwise as removal instructions explain but struggling to get the f@#%er out any tips ideas . Cheers in advance
 
When I did mine a couple of years ago I followed the advice of a fellow Landyzone member and removed the floor plate and the bulkhead to tub rail.
 
Finally got the tank out had to take bulkhead to tub rail off well partly off , couldn’t get the two nuts off at the bulk head end ,are they supposed to be on captive nuts ? As they are just turning
 
Finally got the tank out had to take bulkhead to tub rail off well partly off , couldn’t get the two nuts off at the bulk head end ,are they supposed to be on captive nuts ? As they are just turning
They should be a captive Bolt plate with nuts rearward. I replaced mine with 20mm stainless bolt which was a fiddle to install but less of a fiddle than getting the rusty captive plate that just spins out in the first place!
 
Back
Top