Fuel Filler Cap - TD5

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
The Unit

The Unit

New Member
Posts
9
Location
Stockton On Tees
Help! I'm probably being thick here, but answers are only obvious when you know them...
I just tried to fill my TD5 fuel tank, but couldn't remove the filler cap. I put he key in, rotated it 180 degrees anti-clockwise, then pressed down on the cap and turned it anti-clockwise, but nothing engaged and the cap just spun. I couldn't fill the tank, so had to resort to filling the front tank instead (the joys of twin tanks on a 6x6!). Thinking about it, this is the first time I've tried to fill the rear tank, so I might be doing something wrong...any suggestions?
The Unit
 
I just turn key and turn the cap anti-clock wise without pressing down, once key it turned the cap should grip to unscrew, it just turns without gripping without unlocking with key.
 
The Unit said:
Help! I'm probably being thick here, but answers are only obvious when you know them...
I just tried to fill my TD5 fuel tank, but couldn't remove the filler cap. I put he key in, rotated it 180 degrees anti-clockwise, then pressed down on the cap and turned it anti-clockwise, but nothing engaged and the cap just spun. I couldn't fill the tank, so had to resort to filling the front tank instead (the joys of twin tanks on a 6x6!). Thinking about it, this is the first time I've tried to fill the rear tank, so I might be doing something wrong...any suggestions?
The Unit
Click to expand...
Probably a child proof lock, get a grown up to help you, lol
 
David Leech said:
I don't know if my TD5 cap is original or not but I turn key clockwise and cap anticlockwise to open it.....
Click to expand...
Turning the key clockwise just makes the top of the cap loose. Turning the key anticlockwise gives a hint that something may be trying to engage, but fails.
Guess the next question becomes: How do you get a failed cap of the filler neck?
 
From the locked position turn the key clockwise to unlock it but then turn it back anticlockwise and remove the key now try to unscrew the cap. This I had to do with my one when I first had it. Not sure if it is std td5 cap or aftermarket but I replaced it because of the faffing.
 
The Unit said:
How do you get a failed cap of the filler neck?
Click to expand...

I have the earlier tdi style caps so cannot helr in the correct unlocking procedure. But removal of a broken one is fairly easy. The caps are plastic the filler neck is metal so as long as you are not planning on reusing the cap they can just be hacked off with a pair of pliers and some careful cutting/chiseling.
 
Final update - replaced the old cap with a new TD5 cap - problem solved. New opening procedure: turn key anticlockwise 180 degrees, then rotate cap anticlockwise to open tank. Closing is reverse, rotated cap clockwise until it clicks, then turn key 180 degrees clockwise and remove. All seems very straight forward, WHEN THE LOCK WORKS!
Old cap removed by simple brute force, no tools required, which is also a bit of a concern but probably indicates a fault with the original cap anyway.
Thanks for all the suggestions and, erm, useful comments!
 
When cap is off you can turn the key clockwise to lock position and remove the key then put cap on, it is easier to put on that way if key is on a key ring with other keys.
 
You must log in or register to reply here.

Similar threads

2
Early 90 fuel filler neck and hose
Replies
1
Views
581
johnlad
johnlad
M
Fuel cap seal
Replies
11
Views
2K
marc.postle
M
Atomician
Don't take the key out the fuel cap......
Replies
5
Views
2K
Atomician
Atomician
T
TD5 crank no start after overheating
Replies
1
Views
436
tom1979
tom1979
Sieklo
Disco 2 TD5 Fuel line green fitting on the pump popping out
Replies
6
Views
1K
tilly2
T
Back
Top