Front end camber

Good evening Landy folk... I have finished the 40mm lift on Freelander and fit camber bolts.

First question... Do they replace the top bolt on the bottom of the strut? (Hoping so as that's where they've gone)
Secondly... Is setting the camber a garage job or could it be done with a spirit level on a flat road? (Might be a ridiculous but had to ask)

I also had 225/75/16 tyres and km really enjoying it so far. Might be compensating for something but it's made me happy

Top position for the bolt is ok.

It'll need 4 wheel alignment, and tell them about the camber correction bolts.

Righto... Thought I was being optimistically tight thinking a spirit level would do it

Adwilko88 said:

Righto... Thought I was being optimistically tight thinking a spirit level would do it

Click to expand...

Not unless your spirit level can show you an accuracy of 10ths of a °

You can get a rough approximation by measuring the gap between the tyre sidewall and the strut, and setting both sides the same, so you can get it to the alignment place, with balanced alignment, but it needs proper setting up on an alignment machine.