tlo
Active Member
- Posts
- 558
- Location
- nottingham
does any one have a link/tut on how to remove the front bumper on a face lift 2006 td4 ? I have to change the condenser. Is that straight forward ? thanks
Freelander 1 Front bumper removal
- Thread starter tlo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tlo
Active Member
- Posts
- 558
- Location
- nottingham
What no one had to change one or remove the bumper you lucky lot 
GrumpyGel
Well-Known Member
- Posts
- 26,390
- Location
- Christchurch, New Zealand
Fraid I don't have a posh facelift
guineafowl21
Well-Known Member
- Posts
- 3,349
- Location
- Inverness
Did mine a while ago, so details are sketchy, but as I remember it’s just a case of wiggling it to see where the next fastener was...
Free it at the slam panel/headlights, then underneath where the undertray goes. Then there are some sods inside the wheelarch that you’re best just snapping away and replacing with cable ties.
Of course, almost every fastener is different, so take your time.
tonytherunner
Active Member
- Posts
- 339
- Location
- wherever the road takes me
tlo
Active Member
- Posts
- 558
- Location
- nottingham
Sometimes I wish I didn't eitherFraid I don't have a posh facelift
Thanks lads I will have a go just after I have done the shoes and pads, not as many screws as I thought I know that the drivers side screw were it bolts to the bumper in the wheel arch is broken
guineafowl21
Well-Known Member
- Posts
- 3,349
- Location
- Inverness
