Freelander Mk1 - A Bar fitting

K

KEVIN.H

New Member

Posts

5

• Oct 24, 2007

• #1

HI, new boy here ,please be gentle.
I have the LR A frame /Bull bar for my 1.8 2000 Freelander, however I need the upper mounting brackets.LR don't sell these seperatly..
Q. Does anyone know where I can get these/anybody have spares?
Q. Anyone have the fitting instructions ?
Q. Do you have to put holes through the plastic bumper for these upper brackts ?
Any help welcome.
Thanks.

 

Optimus Prime

Well-Known Member

Posts

5,988

Location

Garden of England

• Oct 25, 2007

• #2

go here:

The Green Oval - Downloads | Land Rover Data

and download the rave cd

If it's a genuine land rover part, the fitting instructions will be on there. As for the fitting brackets, if you have a picture, you might be able to get someone to fabricate them.

Landy luck to ya

 

RAZ8550TDI

New Member

Posts

3,573

Location

liverpool

• Oct 26, 2007

• #3

yer got enough power to drive it when there on?? i hear they weigh a bit??

 

1dirtylandy

Active Member

Posts

468

Location

s wales

• Oct 26, 2007

• #4

The A-bar on mine fitted via the two bolt on brackets on the bottom and the top mounts were just two flat bits of steel that bolted to the a-bar and with two very course self tappers that screwed into the bumper after drilling a pilot hole through steel....look on my members gallery and see if its a similar type bar to yours if so give me a shout and i will give you any advice if i can to fitting it...

 

K

KEVIN.H

New Member

Posts

5

• Oct 27, 2007

• #5

Thanks for the pointer, but i need it on the front so ever time i'm towed i don't damage their motor when they brake !

 

K

KEVIN.H

New Member

Posts

5

• Oct 27, 2007

• #6

Thanks for the help but mine is the LR part no. STC50413 'soft' A Bar/protection Bar.

 

K

KEVIN.H

New Member

Posts

5

• Nov 1, 2007

• #7

Thanks,managed to download the fitting instructions,all becomes er..clearer.
Thanks again.