Jamaybyrone
New Member
- Posts
- 2
- Location
- Nantwich
Freelander 2 roof stud LR026326
- Thread starter Jamaybyrone
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Did you resolve this problem?
I was fitting a set of roof bars yesterday and managed to shear off a bolt in the rear near side stud, I took the stud out but was unable to cleanly extract the bolt, my next plan was to try and drill a hole and tap a new thread in one of the studs I’d replaced at the front with the stud they sent with the roof bar kit but when I looked at it more closely it turns out it’s the same as the rear ones, just painted over, so I was able to use one of those instead.
hope this is helpful
I was fitting a set of roof bars yesterday and managed to shear off a bolt in the rear near side stud, I took the stud out but was unable to cleanly extract the bolt, my next plan was to try and drill a hole and tap a new thread in one of the studs I’d replaced at the front with the stud they sent with the roof bar kit but when I looked at it more closely it turns out it’s the same as the rear ones, just painted over, so I was able to use one of those instead.
hope this is helpful
