Freelander 2 11plate

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

d17len

New Member
Posts
2
Hi All , not been on for a while as my landys have been behaving!!
However on my FL2 11plate 95k, we hit a big puddle during storm Bert at speed and it put in "low engine performance" managed to get home, put in new air filter, changed mass air flow sensor and crankshaft sensor behind o/s wheel cowling, the symptoms are now she will start/sit on idle for ever and rev and hOLD her on 2k rpm, but as soon as you floor the throttle and release it she stops, 5 minuets later she will restart and so on and so forth, there is no smoke from the exhaust and oil level is exactly right, any ideas are most welcome TIA
 
Why change the MAF? Did it get wet? Has an air path calibration been carried out? If any sensors in the air path are change, an air path calibration needs to be carried out, or the engine won't run correctly.
 
Back
Top