Freelander 1, Td4, 2004 High Pres Fuel pump screws.

Hard Drive · Mar 17, 2020

Having replaced the Torx screws on my Freelander 1, Td4, 2004, M47 Engine High Pressure Fuel Pump and its pressure regulator, I thought the following info might be of use to others.

There are 12 main-body screws, plus 2 for the regulator.

See the photo for sizes etc.

The Allen Key sizes are given too.
You will need to cut the screws to length as well.

Arctic2 · Mar 17, 2020

What was wrong the original ones?

Hard Drive · Mar 17, 2020

Arctic2 said:
What was wrong the original ones?

I discovered they, the original Torx screws, were made from mild steel that rounded-off easily. Rusty as hell too, which is probably why!!
This meant that out of the 12, 3 were difficult to remove and needed drilling-out followed by an Easyout!

Arctic2 · Mar 17, 2020

Hard Drive said:
I discovered they, the original Torx screws, were made from mild steel that rounded-off easily. Rusty as hell too, which is probably why!!
This meant that out of the 12, 3 were difficult to remove and needed drilling-out followed by an Easyout!

Thank you for your reply, seems an excellent modification so thank you for sharing

Freelander 1, Td4, 2004 High Pres Fuel pump screws.

Hard Drive

Active Member

Arctic2

Well-Known Member

Hard Drive

Active Member

Arctic2

Well-Known Member

Similar threads