Freelander 1 2005 Rear parcel shelf trim
- Thread starter andde
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
GrumpyGel
Well-Known Member
- Posts
- 26,306
- Location
- Christchurch, New Zealand
I would imagine the place you got the parcel shelf from.
i asked them, but no
That support is for 3 doors and yours is 5 is not it? I looked for it and didn't find it. If it helps, I made a measurement and much stiffer... Good luck.
https://www.landyzone.co.uk/land-ro...freelander-today.199594/page-546#post-5015141
https://www.landyzone.co.uk/land-ro...freelander-today.199594/page-546#post-5015141
Nice work. I have a 3doors FL, and already have the rear parcel shelf, i'm just missing the trim for fixing it.
Kevm
Active Member
- Posts
- 181
- Location
- Gainsborough
https://www.scuderiacarparts.com/part/965034/landrover/stc50372puy/kit-fixing-parts.html
Probably find they don't have any but doesn't hurt to ask.
Also I have seen 3d printed versions of these knocking about.....if you have a printer.....or a friend with one.
Probably find they don't have any but doesn't hurt to ask.
Also I have seen 3d printed versions of these knocking about.....if you have a printer.....or a friend with one.
Thanks, i asked them and emailed me saying that ref isnt available anymore.
The ref is : STC50372PUY, you can see here https://parts.jaguarlandroverclassic.com/stc50372puy-kit-fixings.html
About the 3d printed versions, do you mind to share plans if you have ?
GrumpyGel
Well-Known Member
- Posts
- 26,306
- Location
- Christchurch, New Zealand
J_D
Well-Known Member
- Posts
- 633
- Location
- Worcestershire
I'd look at making something to fit. Just needs a slot to go into and something to keep it there. Fixed in a couple of places to the plastic trim to stop it spinning round.
Wow, someone is making some money on those.
Kevm
Active Member
- Posts
- 181
- Location
- Gainsborough
https://cults3d.com/en/3d-model/various/support-plage-arriere
Although this looks chargeable, there may be other free ones out there
Although this looks chargeable, there may be other free ones out there
4Bee4Bee
Well-Known Member
- Posts
- 322
- Location
- Shropshire
Wow, someone is making some money on those.
They don’t look that good a finish either. But to be fair, they probably do take the best part of a day to print. And I ‘pose it does solve the issue.
ivancrx
Well-Known Member
- Posts
- 601
- Location
- Burton on Trent
I have a pair of 3d printed ones I can sell, they need painting but I can do the pair for £35.00 delivered to mainland uk.
Kevm
Active Member
- Posts
- 181
- Location
- Gainsborough
Andde, you should have a message
Kev
Kev
