Fitting new seat backs query

Hi all,

I bought a pair of new outer seat backs to replace my crappy old ones.
They arrived today...I notice they are ****Part ones.

Problem is..the original seat backs are connected to the frame by a bolt that goes into the metal seat back frame. See pic:



The new ones seem to have a wooden frame inside (considerably lighter than the OEM ones)...so there is no hole for a bolt to fix to the frame. See pic:



Can anyone confirm if these ****Part ones are in fact wooden inside...and what sort of fixing should I use to go through the original metal bracket (I can't put a nut on the end of a bolt without ripping the seat open??

Cheers

I got exmoor trim ones that also didn't have a hole since I wanted the pin type they got sent back.
But it seemed like they had a hole under the vinyl for the bolt. Have you tried feeling for the hole?

(the exmoor ones were metal framed)

SpringDon said:

I got exmoor trim ones that also didn't have a hole since I wanted the pin type they got sent back.
But it seemed like they had a hole under the vinyl for the bolt. Have you tried feeling for the hole?

(the exmoor ones were metal framed)

Click to expand...

Thanks!
You are correct..I hadn't thought there might be a hole under the material. There is..and it appears to be threaded for a bolt - which solves my problem....I prefer having a bolt than a pin to secure it. It does appear to be a plastic frame inside too...significantly lighter and less substantial that the original LR part....but a lot cheaper too !