Fitting a Steering guard to a 90 Puma

Well I bought a steel steering guard from simmonites today and have put it together but just wanted to check on what i mount it on as i don't really have a clue to be honest I'm assuming its where the towing eyes are? any input to a stupid noob would be appreciated.

George

The holes should line up with existing holes in the chassis so more than likely some of them will be from the original tie down eyes. ( the standard ones that are on it are only for tying it down when it is being transported). Does the gaurd have recovery points fitted? If not you should get some jate rings

okay thanks didn't realise they weren't towing eyes i assume they're the original ones for tying it down will have a go at mounting in and if i struggle will be straight back on here for more help

george

Didn't quite get there today but got one of the brackets on but could get the other as need a breaker bar to crack one of the nuts off as its so tight but will do it tomorrow on the farm and get a hand for mounting the guards thanks for the advice but found a good video on youtube that helped.

George