fender EDC or Non-EDC??

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
timtheenchanteruk

timtheenchanteruk

Well-Known Member
Posts
4,633
Location
Leeds
Im confused.
EDC from what I can tell should have plugs on the EGR and top of the fuel pump, and an ECU under the centre seat.

My fender, a 96 has these plugs on the pump and EGR, but no ECU.
do these plugs do something else, or are the just plugged in cos the loom is the same?

looked around to see if theres another way to tell, but as yet turned up nothing.

loom looks ok, nothing looks chopped/missing in the bit of loom under the middle sat (under the inspection panel)
 
As far as I know the egr is desperate from edc. My 300tdi had an egr and associated crap but is definitely not edc.

I think if you've got edc you'll have wiring going to one of the injectors.
 
cheers, kinda what I thought. no wiring to injectors, just the one on the pump & EGR.
EGR will be going, its still connected & working ATM, its a roundtuit job for when the weathers a bit nicer,
Cant get enough spanner time as it is to fix what needs fixing, let alone what aint broke!!
 
redhand said:
Yep getting a lot of white smoke at idle. which I suspect is been caused by the egr still been active. so next job on the list is a blanking kit.
Click to expand...
White smoke is unburnt fuel,so nowt to do with EGR.More likely a dribbling injector...
 
You must log in or register to reply here.

Similar threads

ryan_1993
Fitting a new engine loom 300 tdi
Replies
0
Views
450
ryan_1993
ryan_1993
T
P38A P38 DSE Manual (non-EGR) No turbo boost
Replies
7
Views
573
Grrrrrr
Grrrrrr
spacebrodie
Freelander 2 (LR2) Cut out - P0045-19
Replies
6
Views
546
Arctic2
Arctic2
S
2012 Disco 4 Just wont start.
2
Replies
28
Views
5K
Graculus
Graculus
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
310
xDParis64
xDParis64
Back
Top