archwayanimal
Active Member
- Posts
- 178
- Location
- Oxfordshire
M&S lights have come on - showing 0753 fault. Changed the XYZ switch a few weeks ago but has been fine. Can clear the fault but comes back after a minute or so of driving. Any ideas?
Fault code 0753 Solenoid 1 valve?
- Thread starter archwayanimal
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sierrafery
Well-Known Member
- Posts
- 17,562
- Location
- Arad/Romania
P0753 is about the shift control solenoid MV1 which is in the valve block or the circuit to it(chafed loom on that path ?), the XYZ switch has nothing to do with it... if the loom is intact you can see if it clicks or not forced with nanocom or similar... unless it's a problem in the circuit between the console plug and TCU.... troubleshooting is needed
Attachments
archwayanimal
Active Member
- Posts
- 178
- Location
- Oxfordshire
Thank you Sierrafery - we will drop the valve block and also check the loom.
