Exhaust for '90

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Def90man

Def90man

Percy the Pedant
Full Member
Posts
12,081
Location
Far out West
My 1994 300tdi 90 is needing a new exhaust. The down pipe is good but I would like to get away from the rear section that does a 180 degree turn (esr2382). Would the later 300tdi short centre box (esr4526) and straight through rear section (esr4527) fit onto the existing down pipe?
 
Def90man said:
My 1994 300tdi 90 is needing a new exhaust. The down pipe is good but I would like to get away from the rear section that does a 180 degree turn (esr2382). Would the later 300tdi short centre box (esr4526) and straight through rear section (esr4527) fit onto the existing down pipe?
Click to expand...
ESR4526 and ESR4527 fit on to the flexi down pipe ESR3495 as well as the non flexi down pipe ESR2297 Both of these down pipes are used on the 1994 model and the later models. So, I would say yes.
You can check out the different exhaust combinations on the Paddocks site HERE
 
Al2O3 said:
ESR4526 and ESR4527 fit on to the flexi down pipe ESR3495 as well as the non flexi down pipe ESR2297 Both of these down pipes are used on the 1994 model and the later models. So, I would say yes.
You can check out the different exhaust combinations on the Paddocks site HERE
Click to expand...

Thanks. I was looking on paddocks but wanted to check they would fit before I bought them. I never liked the rear box on the 90's.
 
Def90man said:
Thanks. I was looking on paddocks but wanted to check they would fit before I bought them. I never liked the rear box on the 90's.
Click to expand...
I've got the straight through style with the CAT flexi pipe on the front and centre box. Never had a problem with it, but the parts are tricky to get from local motor factors. They tend to keep the 180 degree bend ones. Around here anyway. Of course you can always get them from Paddocks and probably most other online Landy parts websites.
 
Def90man said:
Yes all sorted and got rid of the restrictive rear box thanks :)
Click to expand...
Tremendous. :)
I've just had the centre box and tail pipe delivered from LR Direct for mine. Local motor factors can supply the front pipe and CAT, but their system doesn't hold the rest :rolleyes: It's just the tail pipe that's rotted away, but the box will go next.
Pleased you got it sorted, where did you get the parts?
 
Al2O3 said:
Tremendous. :)
I've just had the centre box and tail pipe delivered from LR Direct for mine. Local motor factors can supply the front pipe and CAT, but their system doesn't hold the rest :rolleyes: It's just the tail pipe that's rotted away, but the box will go next.
Pleased you got it sorted, where did you get the parts?
Click to expand...


I’m sure it was Paddock’s as they are best for postage as a lot of places take one look at address and think of a number and double it
 
Def90man said:
I’m sure it was Paddock’s as they are best for postage as a lot of places take one look at address and think of a number and double it
Click to expand...
Good on them.
I was just wondering if you'd managed to get them locally. I think that system was only fitted for a couple of years, so they're tricky to get from local motor factors. No bother from Paddocks, LR Direct etc. :)
 
You must log in or register to reply here.

Similar threads

Crunky
90 TD5 Centre box delete problems
Replies
7
Views
394
Crunky
Crunky
R
1987 90 NA to 200tdi
Replies
11
Views
1K
dag019
dag019
H
2.5TD where to mount center exhaust bracket
Replies
10
Views
1K
dag019
dag019
A
Td5 silencer removal.
Replies
4
Views
777
Anaconda
A
L
Ex Mod Defender 90 (1992) - Front Exhaust Down Pipe Installation Issues
Replies
5
Views
1K
Seaswood
Seaswood
Back
Top