estmated life of clutch

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
D

dorothy J

New Member
Posts
14
Hi all I have had a disco 1 300TDI now for over a year when i brought it it had 128000 miles on the clock I do not know how it was used before I got it, in the year that i have had it there is not a problem at the moment. I use it most days and have been towing a caravan for 3 times in the year it has now done 140000 is it about the time for a new one

Dorothy J
 
dorothy J said:
Hi all I have had a disco 1 300TDI now for over a year when i brought it it had 128000 miles on the clock I do not know how it was used before I got it, in the year that i have had it there is not a problem at the moment. I use it most days and have been towing a caravan for 3 times in the year it has now done 140000 is it about the time for a new one

Dorothy J
Click to expand...

They will last along time. Depends who the driver is have seen them burn up in 20,000 miles and have seen them last 500,000miles

If not broken no need to replace
 
When working at Scania saw a truck clutch, because of operator error, last less than 40 miles.
 
Like the man says, it'll tell you when it needs replacing. One of the first signs is a rattling from the clutch area that changes tone, or disappears, when you put your foot on the clutch.
 
well thanks guys as you say if it an't broke well it drives fine at the moment the only reason I asked is because it engages right at the top of the pedal.
all I have to worry about is the clonk when releasing the clutch aand now you are going to say the transfer box.hehe
 
dorothy J said:
well thanks guys as you say if it an't broke well it drives fine at the moment the only reason I asked is because it engages right at the top of the pedal.
all I have to worry about is the clonk when releasing the clutch aand now you are going to say the transfer box.hehe
Click to expand...

Clutch slave cylinder??????????/
 
The clunking could be a combination of all the slack in your drive train being taken up. Worn splines on shafts, intermediate bearing, drive flanges etc.
 
I don't get your point. I'm commenting on the aforementioned clunk. It's not likely to be related to the pedal travel. I've done 60000 miles on a clutch that bites at the top.
 
well hi Guys
Guess what the clutch arm failed slave cylinder rod pushed right through so have new clutch now
 
well that solve that problem the slave cylinder went right through the arm of the clutch. And ended up on the back of an AA truck. Glad I had AA repair insurance So while it was being replaced had a new clutch fitted but the old one it still had some life in it
 
dorothy J said:
well that solve that problem the slave cylinder went right through the arm of the clutch. And ended up on the back of an AA truck. Glad I had AA repair insurance So while it was being replaced had a new clutch fitted but the old one it still had some life in it
Click to expand...

As long as the new type reinforced clutch fork was used ... :cool:
 
You must log in or register to reply here.

Similar threads

I
Coolant consumption - Discovery 5 (2021) P360
Replies
15
Views
437
Anaconda
A
Lej
Discovery 2 Clutch failure
Replies
2
Views
630
Lej
Lej
RudeBoyPL
Disco 2 strange balance readings when rolling with clutch pressed
Replies
0
Views
198
RudeBoyPL
RudeBoyPL
S
Discovery ownership life woes: keep or sell?
Replies
8
Views
519
tyregeezer
tyregeezer
S
1993 discovery alarm
Replies
4
Views
511
Scott120160
S
Back
Top