Engine Swap

bluebill · Jan 12, 2008

After a long time with problems of overheating and tickings noises etc im going to have the engine changed so was wondering if there is anythg i should look out for or do; im going to change it with one out of a an omega its a 1998 2.5 diesel p38 thanks any help would be great.

wadebuild · Jan 12, 2008

Do a search on here for that, i'm sure somebodys just done the same. I remember reading the thread!

Geekfreek · Jan 14, 2008

bluebill said:
After a long time with problems of overheating and tickings noises etc im going to have the engine changed so was wondering if there is anythg i should look out for or do; im going to change it with one out of a an omega its a 1998 2.5 diesel p38 thanks any help would be great.

Hi Bill,

I've just done this exact same swap, look or my posts on p38 overheating, all the info is there.

If you need any help, just mail me, it's a fairly easy swap.

Let us know how it goes.

wadebuild · Jan 14, 2008

I knew it!

iannotts · Jan 14, 2008

Sure I read somewhere that the omega engine is more sluggish than the range rover engine, the cam or something internal is different.

bluebill · Jan 16, 2008

Geekfreek said:
Hi Bill,

I've just done this exact same swap, look or my posts on p38 overheating, all the info is there.

If you need any help, just mail me, it's a fairly easy swap.

Let us know how it goes.

IS it ture that they are sluggish the omega to the range rover they are identical though

Geekfreek · Jan 17, 2008

bluebill said:
IS it ture that they are sluggish the omega to the range rover they are identical though

I was looking for a new head for my dse, the place I got my rebuilt head from said they were all the same, same cams.

I've just put an Omega engine in and to be honest it feels much flatter, almost gutless!, my old motor had the hot start fault and did the usual diesel haze of smoke under load, now it starts very easy from hot and never smokes at all, even when the pedal if floored under load, so I think there's a differance in the injection pumps. I have a PSI chipbox that I'm going to try when I get a chance, if that doesn't improve things I'll swap the pumps over.

To be honest, it's not nice to drive at the moment, it didn't exactly smoke tyres before the swap, but it was driveable.

Engine Swap

bluebill

New Member

wadebuild

New Member

Geekfreek

New Member

wadebuild

New Member

iannotts

New Member

bluebill

New Member

Geekfreek

New Member

Similar threads