Electricary cable options

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
P

Paulmitchell1984

Well-Known Member
Posts
1,819
Location
Leeds
Im going to be wiring up some carling switches before long, for LED light bar, lockers, spot lights fan etc etc, would the below cable from this website be fine, or should i move up to thicker cabling. was planning to get black/red and using same cabling accross the board so will be over rated for some jobs but suffice for others

Standard Cable

item 010104 or 010105..
 
i would assume nearly all accessories will be relay switched so for the low current switched side of things it will be fine
 
just out of interest i think my led light bar is 240w which is biggest single item i would have on 1 circuit, spots are 55w each and only 2..


so would amps be = 230/12.9(ish) = 17.82 amps, so if i get cable thats 65/0.30 which is rated at 35 amps ( i think) would that cover me, or have i worked it out wrong
 
fair enugh, TBH i will end up labeling most cables, but im trying to leave as much of existing loom alone as possible, just getting worrid i might have cut a wire i shouldnt have under engine fuse box :S
 
You must log in or register to reply here.

Similar threads

dag019
Fitting a Husky Winch
Replies
8
Views
620
dag019
dag019
MikeFl4
P38A Possible coolant in oil
Replies
9
Views
932
Datatek
Datatek
malcolm_durant
Freelander 1 How generic are the cabin wiring looms?
Replies
10
Views
1K
damian46
damian46
dag019
LED spotlight recommendations
Replies
2
Views
1K
Knappster
Knappster
S
Defenders Vs Insurers tomfoolery
Replies
1
Views
3K
lightning
lightning
Back
Top