Nigel888
Member
- Posts
- 14
While correcting many of my new toys little quirks ... (like light do the opposite to the stalk) ... I must have knocked some of the quality wiring.
Being a hybrid and on it xx rebuild, the electrics could have come from anywhere. Started a 2 1/4 petrol 88", new chassis and loopy 4.6 v8 with defender body work, now 200tdi from discovery.
The problems that all seemed to start at the same time -
Dash lights not working
Fuel gauge not working, reads empty
Hand brake light not coming on
This happened after working near the bulkhead wiring loom in the engine bay, drivers side. Correcting the headlight connections, replacing horns, wiring in the heater plug relay.
I have checked fuses, had the dash out to look for loose wires, got really confused at all the plugs that are not used in the engine bay. I even put some more fuel in!
From what I can see the two cable that come from the fuel gauge are not connected to anything but the only empty sockets are multi plugs.
Any ideas?
Being a hybrid and on it xx rebuild, the electrics could have come from anywhere. Started a 2 1/4 petrol 88", new chassis and loopy 4.6 v8 with defender body work, now 200tdi from discovery.
The problems that all seemed to start at the same time -
Dash lights not working
Fuel gauge not working, reads empty
Hand brake light not coming on
This happened after working near the bulkhead wiring loom in the engine bay, drivers side. Correcting the headlight connections, replacing horns, wiring in the heater plug relay.
I have checked fuses, had the dash out to look for loose wires, got really confused at all the plugs that are not used in the engine bay. I even put some more fuel in!
From what I can see the two cable that come from the fuel gauge are not connected to anything but the only empty sockets are multi plugs.
Any ideas?