Electric Problem

Rambo4 · Aug 15, 2011

So I was taking out my headliner yesterday and in doing so I blew a fuse when I was removing my rear overhead lamp. I replaced the fuse but now I've noticed that my radio doesn't work, my clock barely shows anything (not completely dead...strange I thought), and my car doesn't recognize my key fob!!! I disconnected the battery for a few seconds and still nothing happened. I'm fairly sure I've checked all the fuses and now I'm at a loss on where to go. Any ideas?

sierrafery · Aug 16, 2011

Does it start easyly?

Rambo4 · Aug 16, 2011

Yeah...it starts like normal.

sierrafery · Aug 16, 2011

For the fob issue ... u might have disturbed the receiver which is between the sunroofs ...if u disconnected the battery u have to introduce a code for the radio to work... about the clock i have no idea(unless is a bad contact somewhere). U can also check the BCU's plug, it used to make tricks due to water ingress there.

Rambo4 · Aug 16, 2011

I don't think I need a code for my radio...I've disconnected my battery before without any problems. Plus my radio is completely dead so I can't enter a code anywhere on it. Where can I find the BCU's plug?

Bromsgrove Defender · Aug 16, 2011

Rambo4 said:
I don't think I need a code for my radio...I've disconnected my battery before without any problems. Plus my radio is completely dead so I can't enter a code anywhere on it. Where can I find the BCU's plug?

Sounds like you blew more than one fuse

Sorry no idea where the BCU plug is

sierrafery · Aug 16, 2011

The BCU is behind the glove box together with the SLABS ECU and ACE Ecu some common issues here http://www.landroverclubvi.com/uplo...de_troubleshooting_and_upgrade_8601nasf_2.pdf and here http://www.landroverclubvi.com/uplo...odule_troubleshooting_and_upgrade8610nasf.pdf

Rambo4 · Aug 17, 2011

Bromsgrove...you were right. I double checked all my fuses again and apparently I skipped over one of them. I replaced it and it fixed all my problems. Thanks for all the help!

Bromsgrove Defender · Aug 17, 2011

Rambo4 said:
Bromsgrove...you were right. I double checked all my fuses again and apparently I skipped over one of them. I replaced it and it fixed all my problems. Thanks for all the help!

No problem. Glad all is well

glen40 · Aug 17, 2011

sierrafery said:
The BCU is behind the glove box together with the SLABS ECU and ACE Ecu some common issues here http://www.landroverclubvi.com/uplo...de_troubleshooting_and_upgrade_8601nasf_2.pdf and here http://www.landroverclubvi.com/uplo...odule_troubleshooting_and_upgrade8610nasf.pdf

Great Links, are similiar ones available for Disco I

Electric Problem

Rambo4

New Member

sierrafery

Well-Known Member

Rambo4

New Member

sierrafery

Well-Known Member

Rambo4

New Member

Bromsgrove Defender

Well-Known Member

sierrafery

Well-Known Member

Rambo4

New Member

Bromsgrove Defender

Well-Known Member

glen40

Member

Similar threads