P38A EAS Valve Block NRVs

T

tank93

Active Member

Posts

162

• Wednesday at 15:21

• #1

Hi,

Does anybody know if/where the three NRVs can be purchased from as shown in the pic below? Will shortly be overhauling my valve block and would like to replace them along with all the o 'rings.

Thanks

 

Datatek

Well-Known Member

Posts

45,487

Location

Near Poitiers SW France

• Wednesday at 15:52

• #2

tank93 said:

Hi,

Does anybody know if/where the three NRVs can be purchased from as shown in the pic below? Will shortly be overhauling my valve block and would like to replace them along with all the o 'rings.

Thanks

View attachment 335395

Click to expand...

Unless the cone is very badly worn, any ridge can be taken out by putting the shaft of the valve in an electric drill and carefully using a file to smooth the cone off. Not sure replacements are available, Kurt Johnson may have some.

 

Mark Piercy

Well fumbled member....

Full Member

Posts

12,970

Location

Sud ouest France !

• Wednesday at 16:27

• #3

@kurtjohnson10