Theroadlesstravelled
Member
- Posts
- 82
- Location
- East Midlands
Any clues my EAS system does not disable with any door or tailgate open I am sure it should TIA
EAS Issue
- Thread starter Theroadlesstravelled
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
rodntod
Active Member
- Posts
- 607
- Location
- ayrshire scotland
You are right,it should.Does the interior light come on when you open the doors?
- Posts
- 58,170
- Location
- Preston Lancs.
BECM issue i would think it is that which inhibits EAS operation with doors ajar.
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Are you sure it's not disabled with the doors open?
As above, plus it could be the link wiring from BECM to the EAS ECU or a corroded connector at either end.
Theroadlesstravelled
Member
- Posts
- 82
- Location
- East Midlands
Thanks for the input people. Yes the EAS is not disabled with any doors open ? The other clue that may help is interior lights will sometimes not turn off also even with the lights disabled on the dash ie interior lights off ! Any more ideas please ? Before i dismantle the BECM
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
As said before, door lock mechanism/ microswitch, or wet carpets.
Theroadlesstravelled
Member
- Posts
- 82
- Location
- East Midlands
Thanks I will check the all the advice given. Am I correct in thinking that the top board of BECM is responsible for the EAS system ?
brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
The eas ecu is under the passenger seat but will get the door signals from becm
- Posts
- 58,170
- Location
- Preston Lancs.
No. EAS ECU is under passenger seat.
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Forget the EAS ECU, it's just responding to a signal from the BECM.
Just start by checking for wet carpet in the drivers footwell, then go on to check the door micros witches.
Just start by checking for wet carpet in the drivers footwell, then go on to check the door micros witches.
Theroadlesstravelled
Member
- Posts
- 82
- Location
- East Midlands
Update: replaced micro switch in drivers door and appears to have solved the problem thanks for the valuable advice
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
They are not supplied separately, you will have to find a drivers door lock with the motors burnt out, there should be plenty about
Similar threads
