E.a.s. Problem ????????

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
mozz smith

mozz smith

Well-Known Member
Posts
1,690
Location
tameside manchester
:(:(:welcome2:hi lads my mate is stuck in the middle of the sticks in lincolnshire :(can you help . he has a n reg 4.6 hse rangie yesterday he towed a small trailer for a couple of miles then when he got up this morning his airbags are not inflateing there is no leaks anywhere ?? on the dash when he turns ignition on it reads ( SLOW 35 MPH EAS FAULT ) so can u help and let me know how to clear fault , will it help if he undos the battery then reconnect or unplug the becm box if so how is that done ..any help would be really apprecieated and then i can relay info to him via phone as he has no computer ,, thanks lads in anticipation ..manchester mozz:):):)
 
If there are no leaks why has the suspension dropped? None inflation usually means no air pressure. It has been said on other forums that disconnecting the battery for thirty minutes will reset the EAS ECU. But i have never tried this. If he tries this make sure he has his EKA code handy and knows how to apply it.
 
hi wammers , my mate has just told me that yesterday when he hooked trailer up he lowered susspenson on the car using switch on dash , down to meet the trailer height then car lowered and then stayed at lower level and then fault sign showed on dash and still there and susspendsion still at lower height ?????? cheers mozz
 
Engine running, close all doors, tailgate, make sure trailer unhitched, then use switch to raise height again; probably stuck in "memory" with trailer socket wired-up......had this before with mine!
 
mozz smith said:
hi wammers , my mate has just told me that yesterday when he hooked trailer up he lowered susspenson on the car using switch on dash , down to meet the trailer height then car lowered and then stayed at lower level and then fault sign showed on dash and still there and susspendsion still at lower height ?????? cheers mozz
Click to expand...

Towing should be done with EAS locked in standard mode. Sounds like there is no air or a faulty sensor. You will have to clear fault before investigate what the problem is. Nothing will happen with EAS locked and message on dash.
 
hi wammers , hes tried taking battery off for 40 mins put back on and still showing fault 35 mph tried raising height and lowering but nothings happening ?????
 
mozz smith said:
hi wammers , hes tried taking battery off for 40 mins put back on and still showing fault 35 mph tried raising height and lowering but nothings happening ?????
Click to expand...

Disconnecting the battery will not clear an EAS hard fault. It's either an EAS kicker from BBS or download the EAS unlock suite to clear the fault.
The suspension will not move until you clear the fault.
 
mozz smith said:
hi keith , so when you say download eas what do you mean ??? sorry for being thick cheers mozz
Click to expand...

Download the EAS unlock suite from www.rswsolutions.com get a cable (coming soon!) and you can sort anything on the EAS. If it's urgent and there is no one near your mate with an EAS kicker then go to www.blackboxsolutions.com and order your own EAS kicker to re-set the fault:)
 
You must log in or register to reply here.

Similar threads

DollyBird
Engine disabled, keys not working, tried the guide “Re-synching the Range Rover P38 diesel engine with the Solved - BECM using a Nanocom” no luck
Replies
9
Views
1K
DollyBird
DollyBird
mozz smith
Other DROPPED CLANGER ??
2
Replies
23
Views
2K
dubbleRR
dubbleRR
Skyisthelimit
No impulse on Discovery 1 1991 model V8 3.5 right hand drive.
Replies
12
Views
900
classic kev
classic kev
Blob
L322 Solved - C1A13-64 (AF) Pressure does not decrease when venting gallery
Replies
2
Views
3K
stuu
stuu
Speedex750
Non standard alternator; problem diagnosis?
Replies
8
Views
1K
freelance
freelance
Back
Top