dse de cat

n10beg · Dec 6, 2012

Hi all, second time I've posted this as im new to the sight and think i put it in the wrong section! Im going to decat my rangie and wanted to remove middle silencer too, has anyone done this? Have any tips or anything that can help me...
Thanks!!

sas1810 · Dec 6, 2012

just had a quote from a place that makes exhausts to replace my centre box on my 4.6, they wanted £75 and thats in stainless. they bend it to the correct shape.

cant advise on de-cat though.

n10beg · Dec 6, 2012

Thanks mate, doesn't sound like too pricey job then!

Saint.V8 · Dec 6, 2012

Can be done, not sure what the MoT would think of it though!

2.0_hippo · Dec 6, 2012

Saint.V8 said:
Can be done, not sure what the MoT would think of it though!

failure me thinks

sas1810 · Dec 6, 2012

2.0_hippo said:
failure me thinks

failure on de-cat petrol. dont think its covered in doozels.

2.0_hippo · Dec 6, 2012

sas1810 said:
failure on de-cat petrol. dont think its covered in doozels.

hmmmmmmmmm

sas1810 · Dec 6, 2012

2.0_hippo said:
hmmmmmmmmm

steady on kid! i can hear the gears going round in your head from here

wammers · Dec 6, 2012

It is illegal not to have a cat fitted to any road going vehicle made in or after 1993 diesel or petrol. Construction and use regulations. However there is no check for diesel cats in MOT. Think i would wait until after January though, new stuff coming in again then i think.

sas1810 · Dec 6, 2012

wammers said:
It is illegal not to have a cat fitted to any road going vehicle made in or after 1993 diesel or petrol. Construction and use regulations. However there is no check for diesel cats in MOT. Think i would wait until after January though, new stuff coming in again then i think.

i was close

i know the SRS is coming in next year, as in , warning light on dash constant = fail.

but got mine sorted today, some plonka had left it disconnected behind the glove box. connected it, ran the diagnostics, and all clear

dave4x4 · Dec 6, 2012

Isn't it a diesel particulate filter rather than catalyst unit?

Also why do you want to remove it?

Peter Sanders · Dec 7, 2012

n10beg said:
Im going to decat my rangie and wanted to remove middle silencer too, has anyone done this? Have any tips or anything that can help me...
Thanks!!

Hi

This will most likely cause a problem with the engine management system.

I know that the O2 sensors are monitored, so at the very least you will have O2 sensor errors in the system.

dogsbody · Dec 7, 2012

Peter Sanders said:
Hi

This will most likely cause a problem with the engine management system.

I know that the O2 sensors are monitored, so at the very least you will have O2 sensor errors in the system.

It's a diesel

n10beg · Dec 7, 2012

Where abouts in the exhaust is the sensor? Its possible to buy a decat pipe so isn't it exactly the same if i just replace it myself? Sorry if my questions seem daft but im not very nolidgeable on mechanics (or spelling)

wammers · Dec 7, 2012

n10beg said:
Where abouts in the exhaust is the sensor? Its possible to buy a decat pipe so isn't it exactly the same if i just replace it myself? Sorry if my questions seem daft but im not very nolidgeable on mechanics (or spelling)

If it's diesel which it being a DSE is highly likely, it does not have a sensor.

dse de cat

n10beg

Member

sas1810

New Member

n10beg

Member

Saint.V8

Dyed-in-the-wool 100% RR Junkie

2.0_hippo

Well-Known Member

sas1810

New Member

2.0_hippo

Well-Known Member

sas1810

New Member

wammers

No longer with us, RIP

sas1810

New Member

dave4x4

Active Member

Peter Sanders

New Member

dogsbody

Very senior member

n10beg

Member

wammers

No longer with us, RIP

Similar threads