Changing my intercooler hoses as 10 years old now. Done the engine front one ( nightmare and ripped me to bits) and both passanger side hoses from intercooler and also on the turbo. The drivers side one as going onto the intercooler one is proving to be a bit of a bar steward. I can see no way to get to it without taking the bumper off. Am l correct in thinking this? Thankyou all.
Drivers side large intercooler hose.
- Thread starter Norton643
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
andyfreelandy
Well-Known Member
- Posts
- 5,659
- Location
- Devon
If the hose clip cannot be accessed then cut the band and fit new with screw aligned to reach it !
A 1/4 in long extension and sometimes a UJ helps.
A 1/4 in long extension and sometimes a UJ helps.
Arctic2
Well-Known Member
- Posts
- 2,790
- Location
- Westmidlands
Are these hoses on a TD4 FL1 if so you should just be able to access the hose through a slight gap with a long screwdriver.
1
2
3
