Double Din Kit For Freelander Facelift with Becker Sat Nav

Jay247 · Dec 1, 2019

Due to selling my car have removed all the kit I bought to fit my Kenwood stereo. This kit will allow you to convert the factory fit stereo so you can use a double din stereo and use the existing amp, steering wheel controls etc. On my car I had the Becker sat nav and Harman Kardon amp. Kit comprises of :

New facia
Incartec Steering Control Interface (29-626) - Brand new sealed
Incartec iso to iso adapter(20-273)
Kenwood steering wheel control cable - Brand new sealed - If you don't have a Kenwood you will need the correct cable(they are about £3)
HK Subwoofer Cable - Brand new sealed - It came with the kit but I never needed it

If you were to buy the kit it would cost over £85.

I am selling it for £40 plus £3.99 delivery

Advertised elsewhere

Jay247 · Dec 4, 2019

Reduced to £30

Bodders · Jun 30, 2020

do you still have this?

Jay247 · Jun 30, 2020

No sorry mate, gone now

Bodders · Jun 30, 2020

No worries, just a question using the Incartec iso to iso adaptor, did all 8 speakers and the sub work?

Jay247 · Jun 30, 2020

Yes all worked mate

Bodders · Jul 21, 2020

Hi mate sorry to bother you again but you seemed to be the only person I have found to get this to work, I have fitted the Incartec iso to iso unit but still nothing at all, the stereo powers on but there is no sound at all, I attached the blue and white to the remote as instructions said to. Did you have any difficulty fitting this?

sorry again

Jay247 · Jul 21, 2020

Only a flat battery! Mine powered on as well but the amp wouldn't turn on, turned out that the battery had gone flat while I had been working on it.

Its been a while since I fitted it, make sure you adjust the levels with the screw things on the interface

Double check your white and blue leads as they turn on the amp, the device seems to be working if you are getting power to the stereo

Bodders · Jul 21, 2020

well I don't know If it is because it always turned on I've just never had sound. I have changed the dials slightly to make sure it was working but still nothing. not to worry I will have to get someone to have a look at it

Jay247 · Jul 21, 2020

The amp turns on independently to the stereo, if the stereo is turning on doesn't mean the amp is. Double check the wiring

Double Din Kit For Freelander Facelift with Becker Sat Nav

Jay247

Active Member

Jay247

Active Member

Bodders

Member

Jay247

Active Member

Bodders

Member

Jay247

Active Member

Bodders

Member

Jay247

Active Member

Bodders

Member

Jay247

Active Member

Similar threads