I just bought my first land rover and I was trying to get it to start easier so I bought new glow plugs and I also was trying get the air out of the fuel system so I read online to crack the bleed screw on the fuel filter head but I accidentally took off the banjo bolt and now I cant get it to start, I tried to get the air out using the lift pump and I tried to turn it over and see if it would self purge but I cant get it to fire up, so im not sure if I have a bad lift pump or I put the banjo bolt on wrong but any help is appreciated
discovery wont start
- Thread starter shadow644
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bigg1115
New Member
- Posts
- 91
- Location
- peterlee, durham
have you tryed towing it mate, or a little squirt of easy start
Loosen the big nut on the top of the injectors where they go in the head.You only need to crack the nuts open,you do not need to take them right off,you are looking for fuel weeping out whilst cranking engine-Be careful not to damage the little black rubber pipes further down the injectors,they are your leak off pipes.
get someone to crank it and while cranking nip one injector open at a time till they dribble and then nip up proceed to next
