plastic soul
Active Member
- Posts
- 432
Anyone out there got a rear diff flange (24 spline) like on old 200tdi discos?
Discovery rear diff flange (200 tdi) not donut
- Thread starter plastic soul
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
plastic soul
Active Member
- Posts
- 432
or 200 tdi rear diff would do
- Posts
- 83,308
- Location
- Embasinga stocæ
nit if yu have 300tdi 24 spline half shafts.
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
do you mean like frc3002
https://www.google.co.uk/url?sa=t&r...o41gvVivMiSSwKlLA&sig2=OaTR_F-ZGhuaKOtTiglBqA
https://www.google.co.uk/url?sa=t&r...o41gvVivMiSSwKlLA&sig2=OaTR_F-ZGhuaKOtTiglBqA
plastic soul
Active Member
- Posts
- 432
Thats the one! Does it matter that is doesn't have the mud shield ring there?
plastic soul
Active Member
- Posts
- 432
Got the old spigot of today, it took 4 hours, the spigot came out eventually but left the surrounding ring in, ended up having to cut it half to death with grinder to get the pig out!
plastic soul
Active Member
- Posts
- 432
It was an absolute pig to get off...3 grinder blades and lots of hammering!!
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
use shield from the old flange if you havent one they are best with them
plastic soul
Active Member
- Posts
- 432
we tried it..it was seriously seized....then tried heat....no joy...then tried...gentle taps...then jacked up on spigot....more heat...spigot came out with collar!
it was a nightmare!
Anyway all out now and ready for new flange..
James I don't suppose you know what size the nut is? if i can get flange alone it will save me a few quid.
thanks
it was a nightmare!
Anyway all out now and ready for new flange..
James I don't suppose you know what size the nut is? if i can get flange alone it will save me a few quid.
thanks
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Last one I did was a #### anorl.
you didnt have a slide hammer then
I bust my slide hammer when I tried on mine, Striped all the threads. Was only a cheapy one mind.
You must have a decent one?
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
not too decent but has a thread on bar the same as landy wheel nuts i weld an 8mm bolt to nut then screw nut to bar
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Ah The threaded bit on mine isn't that big, Was the cheapest I could find and it got me out of the **** at the time. Will have to buy a better one next time.
plastic soul
Active Member
- Posts
- 432
Right, got the part James mentioned, apparently I need a spacer to go in the diff? Is this correct?
plastic soul
Active Member
- Posts
- 432
I got the part but apparently I need a spacer to go in the diff? Is this right?
Similar threads
Freelander 2 (LR2)
Rear Diff Rumble / Judder Just Started