Discovery 2 pre-facelift, front fog light removal

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Stanleysteamer

Well-Known Member
Full Member
Posts
46,748
Location
East Dorset
Hi all,
I was just wondering if there is anyway of removing the front fogs without removing the bumper.
Haven't looked at Haynes of RAVE yet, just wanting a little steer really.
One side the bumper needs repair the other side is OK, but the light isn't working, it used to so I think it may just be the bulb. And it looks pretty fiddly to even just change the bulb.
TIA
 
I have always removed the bumper quarter trim. It's not that difficult just be careful of the clips.
 
Hi, if the problem is on the RH side you dont have to remove the bumper on the LH side it's more complicated due to the washer reservoir. but maybe if you remove that instead of the bumper is doable... i replaced the original front bumper very long time ago with a steel whinch bumper i can't remember how it is, you'll figure it out once the valance is removed... see attachment, the only step on the next page is to remove the lamp
 

Attachments

  • 1744439617805.png
    1744439617805.png
    76.4 KB · Views: 9
Hi, if the problem is on the RH side you dont have to remove the bumper on the LH side it's more complicated due to the washer reservoir. but maybe if you remove that instead of the bumper is doable... i replaced the original front bumper very long time ago with a steel whinch bumper i can't remember how it is, you'll figure it out once the valance is removed... see attachment, the only step on the next page is to remove the lamp
Thanks for this.:)
It is the RH one that basically nearly fell off so I will have to stitch the plastic bits together I do still have the lamp. As for the LH one, it is still in place but I suspect the bulb has gone.
I guess removing the inner wing plastic protector will give me access to that.
I'll get back on here when the weather gets better, the wife gets out of hospital and I can find time to look at it. ;)
 
Back
Top