Wanted Discovery 1 battery clamp
- Thread starter AdamD1
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 9,105
- Location
- Roaming the UK on assignments
M6 thread rod, heat the end and bend around a bolt to make a nice curved bend in it, fit it in place, clamp battery down and cut off the excess with a hacksaw and then paint it with a primer and top coat.
Can use M8 if you want to go OTT but M6 is plenty strong enough.
Can use M8 if you want to go OTT but M6 is plenty strong enough.
