zulle
New Member
- Posts
- 9
- Location
- derbyshire
hi there if i do a 2 inch suspension lift can i get away with springs and dampers or do i have to change the radius arms as well any ideas thanks Ady
disco lift
- Thread starter zulle
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
robint
Well-Known Member
- Posts
- 7,057
try doing a search i would image this has been covered once or twice
Vincemcdonald
Active Member
- Posts
- 488
- Location
- Southampton
I've just fitted 2 inch spacer blocks under the standard springs and so far all is well although I could do with a set of new (plus 2 inch) rear shocks as I have managed to fully extend them with a bit of a thump.
RichardH
Active Member
- Posts
- 187
- Location
- Lanchester, County Durham
As said, there's loads of info on this subject if you do a search.
2" is pretty much the limit without changing anything else but if you're removing your ARBs then check your flexible brake hoses on full drop as you may need to extend these.
2" is pretty much the limit without changing anything else but if you're removing your ARBs then check your flexible brake hoses on full drop as you may need to extend these.
