Disco 200TDI into a Defender 90

So..loads of info on this but nowt much on the exhaust if i may. In regards to the exhaust from the Disco 200TDI transplant does anyone know if you use the original TD middle and rear exhaust sections from a TD? I ask as I've been renovating an old TD which is fitted with a 200TDI Disco unit and need to replace middle and rear exhaust section but don't know where to start/which pipes will fit!

It has a down pipe from the turbo 'locally manufactured' so will need to get a Steve Parkers but any help greatly received.

Thanks

Rich

Iirc lots of the exhaust parts are the same between the td and the tdi.

If the middle and rear sections have 3 bolt flanges they are TD. If two bolt flanges they are TDi . Either type works. 200 conversion in my 90, however I kept the TD system as it was in good nick.

Many thanks for the replies. Do you guys have the Steve Parker link pipe from the turbo down to the middle section?

Ill have a look and see what flanges i have then order the correct ones.

All the best

Rich