Disco 2 ace pump banjo bolt size?

1

109inches

Well-Known Member

Posts

644

Location

Devon

• Jun 4, 2017

• #1

Trying to reinstate the ace in my disco 2 the pump was removed and replaced with an idler pulley so I want to get the ace working again. However in order to understand why the system was removed i need to buy a new pump however it doesn't come with the banjo bolt, so what size is the bolt and is there a part number?
Cheers

 

MJI

Well-Known Member

Posts

15,982

Location

Worcester

• Jun 4, 2017

• #2

The banjos elsewhere are 14m by 14mm with 19mm headed nuts

BTW for the pump pipes don't use 1/4" ID pipes as they do not flow enough, I hope to pick up my 3/8" ID pipes tomorrow night

 

1

109inches

Well-Known Member

Posts

644

Location

Devon

• Jun 4, 2017

• #3

Is leaky pipes the most common failure on the ace system? My disco is currently off the road and I'm getting it to full working condition especially as it's an es model.

 

sierrafery

Well-Known Member

Posts

17,872

Location

Arad/Romania

• Jun 4, 2017

• #4

Yes, leaks are the most common and due to the price of pipes people used to bin the system... there are cheap ways to fix that too these days, as about the banjo to pump(or others) see nr 29 http://www.allbrit.de/UNI.cfm?PAGE=817973&SPRACHE=EN or any other , you need the dowty washers too